The Newman's Energy Machine
By JL Naudin/M.David
created on 07/03/98 - JLN Labs - last update on 07/09/98
07-09-98 - The entropy changes while the Machine runs, a COOLING effect has been observed...
The purpose of this test is to check some eventual changes in the entropy of the Newman's Machine.
I have used a dual
probes digital thermometer (resolution 0.1 degree Celsius) :
- The first temperature probe has been used as reference for the
lab temp (21.5 degrees Celsius)
- The second temperature probe has been glued directly on the
Newman's coil.
I have waited one hour before starting the test for equalizing
the temperatures ( LabTemp = 21.5 degrees, Coil Temp = 21.5
degrees)
The test has been conducted during one hour.
During all the test phase, the lab
temperature was constant (21.5 degrees). The observation of
the Newman's Machine and the collect of the temperature datas has
been done at a distance at least of
2 meters for avoiding any change in
the surrounding of the experiment.
The Newman's
machine has been stopped after the test (a 60 mn run) and 15 mn after
the temperatures were EQUALIZED AGAIN
at 21.5 degrees. This confirms the cooling effect observed in
spite of the mechanical work generated and the joules' effect
dissipated in the coil.
The rotation speed was 286 RPM and the coil voltage used 626 V
The differential voltages I/O measured on the "current control
flow bridge"
were 32V (Input) and 88V (Output) accross the 2uF cap with my new
fast HV diodes.
A cooling effect explanation ? by Tim Vaughan
Some Newman's Machine Keys (updated 06-27-98)
More to come soon....
If you need more informations or if you have any suggestions send me your Feedback
Email
: [email protected]
Return to the Newman's Machine Main page