Magnets Push-Pull project

Some devices/motors ideas...

created on 11-14-98 - JLN Labs - last update on 11-18-98

You will find bellow some MPP's devices ideas, feel free to send me your drawing with some explanation about MPP, I shall be glad to publish them in this page...

Three MPP's devices ideas from Jim Leatherman ( [email protected] ) posted on 11-14-98

A flywheel is necessary to store angular momentum and smooth out torque ripple in the same way as a gasoline engine. The flywheel also provides for the attachment of the drum for the rotating magnets.

One MPP motor idea from Dave Squires ( [email protected] ) posted on 11-15-98

One MPP motor idea from Isaiah Ritchey ( [email protected] ) posted on 11-18-98

Here is my current design. While the main wheel revolves it would continually charge either batteries or capacitors, or both. While charging it would give enough power to the motor to make it spin.

#1.Optional Voltmeter.
#2.Capacitor or battery banks.
#3.Belt drive.
#4.Magnet Piston's magnets.
#5.Revolving Wheel.
#6.Wires to power the motor that controls the drive wheel.
#7.High efficiency generator.

From Isaiah Ritchey
email [email protected]

If you need more informations or if you have any suggestions send me your Feedback

Email : [email protected]

Return to the Quantum Electrodynamics page